BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £1, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!
 |
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | |
United Kingdom Statutory Instruments |
||
|
You are here: BAILII >> Databases >> United Kingdom Statutory Instruments >> The Restrictive Trade Practices (Standards and Arrangements) (Services) Order 1991 No. 1897 URL: http://www.bailii.org/uk/legis/num_reg/1991/uksi_19911897_en.html |
||
[New search] [Help]
Statutory Instruments
RESTRICTIVE TRADE PRACTICES
Made
21st August 1991
Laid before Parliament
23rd August 1991
Coming into force
13th September 1991
The Secretary of State for Trade and Industry, in exercise of the power conferred on him by section 18(5) of the Restrictive Trade Practices Act 1976(1), hereby makes the following Order:-
1.-(1) This Order may be cited as the Restrictive Trade Practices (Standards and Arrangements) (Services) Order 1991 and shall come into force on 13th September 1991.
(2) In this Order-
"the 1976 Act" means the Restrictive Trade Practices Act 1976;
"arrangements" means, in respect of making available, supplying or obtaining any designated services within the meaning of the 1976 Act, arrangements as to the provision of information or advice to persons to or by whom designated services are supplied or agreed to be supplied;
"standards" means, in respect of making available, supplying or obtaining any designated services within the meaning of the 1976 Act, standards of performance in the provision of the services or standards of dimension, design, quality or performance in respect of goods used in providing them.
2.-(1) The standards specified in Part I of the Schedule to this Order, being standards adopted by Electricity Association Services Limited on 13th August 1991, are hereby approved for the purposes of section 18(5) of the 1976 Act.
(2) The arrangements specified in Part II of the Schedule to this Order, being arrangements adopted by Electricity Association Services Limited on 13th August 1991, are hereby approved for the purposes of section 18(5) of the 1976 Act.
Reay
Parliamentary Under Secretary of State for Industry and Technology
Department of Trade and Industry
21st August 1991
Article 2
| 09-�4 | 66 and 132kV impregnated paper insulated oil-filled and gas-pressure type power cable systems Issue 3, 1991 |
| 09-�5 | 275 and 400kV impregnated paper insulated oil-filled and gas compression type power cable systems Issue 3, 1991 |
| 09-�12 | Impregnated paper insulated corrugated aluminium sheathed 6350/11000 volt cables Issue 2, 1990 |
| 09-�17 | Single core cables for use in substations having extruded insulation and rated voltages of 6350/11000 volts and 19000/33000 volts Issue 2, 1991 |
| 09-�21 | Crossed-linked polymeric insulated triplex cables for a rated voltage of 6350/11000 volts (Um=12000V) Issue 1, 1990 |
| 12-�5 | Indicating lamps-�filament type Issue 2, 1989 |
| 12-�10 | Single phase domestic cut-outs, connector blocks and interconnecting units up to 100A rating Issue 2, 1990 |
| 37-�2 | L.V. distribution fuse boards Issue 3, 1990 Errata, 1990 |
| 41-�10 | Switchgear for use on 66, 132, 275 and 400kV systems Addendum, 1991 to Issue 3, 1989 |
| 41-�15 | Standard circuit diagrams for equipment in 132kV substations Part 1: Transformer feeder, transformer end Amendment 1, 1991 to Issue 1, 1978 Part 6: Bus section and bus coupler Issue 1, 1989 Part 9: AC traction supplies to British Rail Issue 1, 1989 |
| 41-�26 | Distribution switchgear for service up to 36kV (Cable connected) Issue 1, 1991 |
| 41-�27 | Outdoor distribution switchgear for service up to 36kV (Overhead conductor connected) Issue 1, 1991 |
| 43-�13 | Aerial bundled conductors (ABC) insulated with cross-linked polyethylene for low voltage overhead distribution Issue 2, 1990 Corrigendum 1991 |
| 43-�14 | Conductor fittings and associated apparatus for use with lv aerial bundled conductors Issue 2, 1990 |
| 43-�15 | Insulator binds and equivalent helical fittings for overhead lines Issue 2, 1990 |
| 43-�88 | Treatment of wood poles and associated timber for overhead lines Issue 3, 1987 |
| 43-�90 | Anti-climbing devices and safety signs for hv lines up to and including 400kV Issue 3, 1991 |
| 43-�93 | Line Insulators Issue 3, 1986 Amendment 1987 |
| 43-�94 | Earth rods and their connectors Issue 3, 1990 |
| 44-�5 | Testing the insulation systems of stator coils for rotating electrical machines Issue 5, 1987 |
| 98-�5 | Automatic ultrasonic testing of tubes Part 3: Longitudinally submerged arc welded steel tubes, outside diameters 160mm and above Amendment No. 1, 1990 to Issue 2, 1989 |
| 98-�16 | Defect evaluation and size estimation by the manual ultrasonic testing method Issue 1, 1990 |
| 98-�17 | Radiographic examination of fusion welded butt joints in steel Issue 1, 1988 |
| 98-�19 | Acceptance criteria for pipe circumferential butt welds in ferritic alloy steels Issue 1, 1990 |
| 98-�23 | Ultrasonic and visual inspection of components lined with tin based white metal Issue 1, 1990 |
| T2 | Transformers and reactors 1966 Section 12: Cable boxes, cable sealing-end chambers and disconnecting chambers Revision 1, 1987 |
| G59/1 | Recommendations for the connection of embedded generating plant to the Regional Electricity Companies' distribution systems 1991 |
| G72 | Operational requirements for SF6 switchgear under loss of pressure conditions 1991 |
| L38/1 | Protective greasing of PVC-covered copper and bare and PVC-covered aluminium based overhead line conductors 1991 |
| M10/4 | Serial numbering of meters 1991 |
| M25/1 | Improving the security of meters and associated service equipment 1987 |
| P23/1 | Customers' earth fault protection for compliance with the IEE Wiring Regulations for electrical installations 1991 |
| ACE 80 | Guide to the maintenance of electrical plant up to and including 132kV 1981 incorporating revised section 30, 1989 |
| G43/2 | Instructions for reporting to the National Fault and Interruption Reporting Scheme 1990 |
| P23/1 | Customers' earth fault protection for compliance with the IEE Wiring Regulations for electrical installations 1991 |
| R1/4 | Immediate notification of dangerous and potentially dangerous incidents and changes in operational practice 1990 |
(This note is not part of the Order)
This Order approves standards of performance in the provision of services and standards of dimension, design, quality or performance in respect of goods used in providing them and arrangements as to the provision of information or advice, all of which have been adopted by Electricity Association Services Limited. The effect of the Order is that, for the purpose of determining whether an agreement is one to which the Restrictive Trade Practices Act 1976 applies, no account is taken of any term in the agreement by which the parties or any of them agree to comply with, or to apply, the standards and arrangements so approved.
The standards and arrangements (other than those which are confidential) may be inspected at the premises of Electricity Association Services Limited, 30 Millbank, London SW1P 4RD.
