The manufacturer's instruction manual dated February 2009, reference: 100SE Issue 1.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50% open position.

Installation and use instruction manual dated February 2010, reference: Part No 106870 Issue No. 1.

Supplementary instruction manual dated May 2010, reference: Part No 106872 Issue No. 1.

The appliance must be fitted with a mechanical stop to prevent closure of the air control beyond the 40% open position.

Operating and Installation Manual dated July 2014, reference: Part No. AFS 1589de.

The appliance must be fitted with a mechanical stop to prevent air control lever closure beyond the 10 mm open position.

Operating and Installation Manual dated July 2014, reference: Part No. AFS 1789de.

The appliance must be fitted with a mechanical stop to prevent air control lever closure beyond the 9 mm open position.

Operating and Installation Manual dated July 2014, reference: Part No. AFS 1789de.

The appliance must be fitted with a mechanical stop to prevent air control lever closure beyond the 9 mm open position.

Operating and Installation Manual dated July 2014, reference: Part No. AFS 1789de.

The appliance must be fitted with a mechanical stop to prevent air control lever closure beyond the 7 mm open position.

Instruction manual dated April 2010, reference: Rev 02.

The appliance must be fitted with a mechanical stop to prevent closure of the air control beyond 20 mm from the closed position and 50 mm beyond the fully open position.

Instruction manual dated January 2012, reference: 01/12 (PP).

The fitting of a system to prevent closure of the air controls beyond the 50% open position must be implemented

Instruction manual dated 28th January 2013, reference: AW1MF0101 Version 3.

A mechanical stop to prevent closure of the secondary air control lever beyond 12 mm open position must be implemented.

Instruction manual dated June 2011, reference: Pevex1001/AH/ver1.

The appliance must be fitted with permanent stops to ensure that the primary and secondary air controls do not close beyond 95% and 50% respectively.

Instruction manual dated June 2011, reference: Pevex1002/AH/ver1.

The appliance must be fitted with permanent stops to ensure that the primary and secondary air controls do not close beyond 95% and 50% respectively.

Instruction manual dated July 2014, reference: Version 1 – 2014.07.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air slider beyond the 55% open position.

Installation and Operating Instructions dated 16th July 2014, reference: N00647AXX Rev 001.

The appliance must be fitted with a modified air control slider to prevent closure beyond the 7 mm open position.

Installation and Operating Instructions dated 16th July 2014, reference: N00645AXX Rev 001.

The appliance must be fitted with a modified air control slider to prevent closure beyond the 5 mm open position.

Installation and Operating Instructions dated 17th July 2014, reference: N00646AXX Rev 001.

The appliance must be fitted with a modified air control slider to prevent closure beyond the 4 mm open position.

Installation and Operating Instructions dated 16th July 2014, reference: N00642AXX Rev 001.

The appliance must be fitted with a modified air control slider to prevent closure beyond the 6 mm open position.

Installation and Operating Instructions dated 15th July 2014, reference: N00644AXX Rev 001.

The appliance must be fitted with a modified air control slider to prevent closure beyond the 35 mm open position.

Instruction manual dated July 2012, reference: HF277-SE/UK-NI-ROI/V2D.18-07-12.

The appliance must be fitted with a mechanical stop to prevent closure of the main air control beyond the 50% open position.

Instruction manual dated July 2012, reference: AL907-SE/UK-NI-ROI/V3-D.14-07-12.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position, and a 70 mm opening of the door rope seal to allow a constant flow of air when sold into smoke control areas.

Angus Orligno 500 7-25 kW boiler manufactured by Eko-Vimar Orlanski Spółka z ograniczoną odpowiedzialnością, ul. Nyska

17 b 48-385 Otmuchów, Poland

Instruction manual dated 31st October 2011, reference: CH8K Apollo – V2.

The fitting of a system that prevents closure of the air controls further than 40 mm from open must be implemented.

Arimax Bio 300 kW

Arimax Bio 400 kW

Arimax Bio 500 kW

boilers manufactured by Artierm Oy PO Box 59 Fin – 43101 Saarijarvi, Finland

Instruction manual dated 13th June 2012, reference: JINAV04 Rev C.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Instruction manual dated 13th June 2012, reference: JINAVC05 Rev C.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Barbas Cuatro-3 57 installation instructions and manual for annual maintenance dated 15th June 2013, reference: 01-333659.

Barbas Cuatro-3 57 instructions for use and maintenance manual dated 15th June 2013, reference: 01-333655.

The appliance must be fitted with an air slider which has a permanent opening of 800 mm² so as to provide air supply when the air slider is fully closed.

Barbas Cuatro-3 70 installation instructions and manual for annual maintenance dated 26th May 2014, reference: 03-336146.

Barbas Cuatro-3 70 instructions for use and maintenance manual dated 27th May 2014, reference: 03-336145.

The appliance must be fitted with an air slider which has a permanent opening of 800 mm² so as to provide air supply when the air slider is fully closed.

Barbas Cuatro-3 75 installation instructions and manual for annual maintenance dated 15th June 2013, reference: 01-333861.

Barbas Cuatro-3 75 instructions for use and maintenance manual dated 15th June 2013, reference: 01-333855.

Barbas Cuatro-3 80 installation instructions and manual for annual maintenance dated 26th May 2014, reference: 03-335878.

Barbas Cuatro-3 80 instructions for use and maintenance manual dated 26th May 2014, reference: 03-335877.

The appliance must be fitted with an air slider which has a permanent opening of 800 mm² so as to provide air supply when the air slider is fully closed.

Barbas Cuatro-3 90 installation instructions and manual for annual maintenance dated 15th June 2013, reference: 01-332965.

Barbas Cuatro-3 90 instructions for use and maintenance dated 10th June 2013, reference: 01-332875.

Barbas ECO Directions for use and Installation instructions manual dated January 2014, reference: 03-334744.

The appliance must have a factory fitted air valve marked ‘UK55'.

Barbas EVO 100-50 installation instructions and manual for annual maintenance dated 20th May 2014, reference: 02-336024.

Barbas EVO 100-50 instructions for use and maintenance manual dated 20th May 2014, reference: 02-336020.

The appliance must be fitted with an air slider which has a permanent opening of 700 mm² so as to provide air supply when the air slider is fully closed.

Barbas EVO 80-65 installation instructions and manual for annual maintenance dated 20th May 2014, reference: 02-334801.

Barbas EVO 80-65 instructions for use and maintenance manual dated 20th May 2014, reference: 02-334744.

The appliance must be fitted with an air slider which has a permanent opening of 700 mm² so as to provide air supply when the air slider is fully closed.

The Unilux instruction manual, document version 01- 326587 dated August 2009.

The ECO 40 instruction manual, document version 01-327332 dated October 2009.

Barbas Unilux-3 Directions for use and Installation instructions manual dated January 2014, reference: 05-326587.

The appliance must have a factory fitted air valve marked ‘UK55'.

Barbas Unilux-3 Directions for use and Installation instructions manual dated January 2014, reference: 05-326587.

The appliance must have a factory fitted air valve marked ‘UK65'.

Operating instruction manual dated 2010, reference: 720574401.

Installation and servicing instruction manual dated 2010, reference: 720574501

Instruction manual dated 6th October 2010, reference: OCT 10/GB.

The appliance must be fitted with a system that prevents the closure of the secondary air flaps beyond the 8 mm open position.

Instruction manual dated 6th October 2010, reference: OCT 10/GB.

The appliance must be fitted with a system that prevents the closure of the secondary air flaps beyond the 10 mm open position.

Instruction manual dated 8th January 2014, reference: NS 7 Issue 1.

The tertiary air control must be fully open when burning wood.

Instruction manual dated 26th January 2011, reference: BFF010.

The air controls must be fixed such that they cannot be closed more than: Primary air slide 2 mm, Secondary air slide 2 mm, Tertiary air slide 30%

Installation and operation manual dated July 2013, reference: 1.01.

The appliance must be fitted with a mechanical stop to prevent secondary air closure beyond the 15 mm open position.

Instruction manual dated January 2011, reference: BUR/11/05.

The appliance must be fitted with an air plate that prevents the tertiary air controller from closing more than 17 mm and opening more than 45 mm

Technical manual dated 17th October 2013, reference: BX1MF 0101.

The appliance must be fitted with a mechanical stop that prevents closure of the secondary air control lever beyond the 12mm open position.

Instruction manual dated 24th April 2012, reference: JINCAM04 Rev B.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Instruction manual dated 14th June 2012, reference: JINCAC05 Rev B.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Instruction manual dated 22nd December 2010, reference: 7196755-Rev 09.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 40% open position.

Instruction manual dated 22nd December 2010, reference: 7196755-Rev 09.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 40% open position.

Instruction manual reference: Carron 11 kW Stove model September 2012 (Smoke Exempt).

A modification to the secondary air control preventing closure beyond 4 mm open must be implemented.

Instruction manual dated 12th January 2011, reference: BHC401-406.

The appliance must be fitted with a system preventing the closure of the secondary air control openings beyond 14 mm.

Instruction manual dated 12th January 2011, reference: BHC501-506.

The appliance must be fitted with a system preventing the closure of the secondary air control openings beyond 3 mm.

Installation and operating instructions dated June 2013, reference: Juno & Vulcan Issue 01.

The appliance must be fitted with a system that prevents closure of the secondary air control slots beyond the 7 mm open position.

Installation and operating instructions dated June 2013, reference: Trajan & Titus Issue 01.

The appliance must be fitted with a system that prevents closure of the secondary air control slots beyond the 9 mm open position.

Installation and operating instructions dated June 2013, reference: Trajan & Titus Issue 01.

The appliance must be fitted with a system that prevents closure of the secondary air control slots beyond the 3.5 mm open position.

Installation and operating instructions dated June 2013, reference: Juno & Vulcan Issue 01.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 5 mm open position.

Instruction manual dated 22nd April 2014, reference: T1202 v 1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 25% open position.

The appliance must be fitted with a mechanical stop to fix the tertiary air control in the fully open position.

Instruction manual dated 6th December 2011, reference: JINHCE08 rev E.

Instruction manual dated 6th December 2011, reference: JINHCE08SCK rev B.

The appliance must be fitted with smoke control area kit JHCE080.

Instruction manual dated September 2012, reference: C-series v2.

The appliance must be fitted with a mechanical stop to prevent air control opening closure beyond the 64 mm open position.

Instruction manual dated September 2012, reference: C-series v2.

The appliance must be fitted with a mechanical stop to prevent air control opening closure beyond the 58 mm open position.

Modification instruction manual dated January 2011, reference: TIS.95.

Instruction manual dated January 2011, reference: Country 4 MKII.

The appliance must be fitted with the manufacturer's smoke reduction kit when used within a smoke control area to fix the minimum aperture of the secondary air inlets to a minimum of 21 mm open.

Installation and use instruction manual reference: COVE1SR01.10 Issue A.

An adjustment of the air control such that the minimum closure of the air control is equivalent to that found with the control pushed in 15 mm from the fully open position must be made.

Instruction manual dated September 2012, reference: C-series v2.

The appliance must be fitted with a mechanical stop to prevent air control opening closure beyond 64 mm open position.

Instruction manual dated March 2012, reference: Ref. C-4 C-6 v1.

The fitting of a system that prevents the closure of the air control opening beyond 58 mm of the open position must be implemented.

Instruction manual dated December 2010, reference: Island I.II.III 12.10 Issue B.

The appliance must be fitted with a stop bracket (kit no. 010/AY83/S) to prevent the airwash flaps at the back of the stove from being closed beyond 2 mm.

Instruction manual dated December 2010, reference: Island I.II.III 12.10 Issue B.

The appliance must be fitted with a stop bracket (kit no. 010/BY83/S) to prevent the airwash flaps at the back of the stove from being closed beyond 2 mm.

Instruction manual dated December 2010, reference: Island I.II.III 12.10 Issue B.

The appliance must be fitted with a stop bracket (kit no. 010/CY83/S) to prevent the airwash flaps at the back of the stove from being closed beyond 2 mm.

Installation and user instructions manual dated 8th January 2014, reference: NS-4. Issue 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air supply control beyond the 7 mm open position.

Chesneys 4 series Instruction manual dated 7th December 2009, reference: CH4K-V4.

The appliance must be fitted with a mechanical stop to prevent closure of the air control beyond the 34 mm open position.

Chesneys 6 Series (7 kW) Stoves:

Flatford 6, Barrington 6, Petworth 6, Hampstead 6, Alpine 6 also sold as: Sunbeam 6, Dakota 6, Providence 6 and the Chelsea 6 also sold as: Wellington 6, Guernsey 6, Belgravia 6 manufactured by Chesneys, 194-200 Battersea Park Road, London, SW11 4ND

Chesneys 6 series Instruction manual dated 7th December 2009, reference: CH6K-V4.

The appliance must be fitted with a mechanical stop to prevent closure of the air control beyond the 10 mm open position.

Instruction manual dated 17th January 2012, reference: JINHCN09 Slider Stop Rev A.

Instruction manual dated 24th January 2012, reference: JINHCN09 Rev F.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

Installation and Operating Instructions manual dated 20th March 2012, reference: JINCN09 RevF.

Modification instructions dated 25th September 2013, reference: JINHCN09 Slider Stop Rev B.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

Instruction manual dated 2nd December 2011, reference: JINCLR04 Rev E.

Instruction manual dated 5th December 2011, reference: JINCLR04SCK rev B.

The appliance must be fitted with smoke control area kit JCLR0401.

Instruction manual dated 10th December 2012, reference: JINCLR05 Rev B.

Instruction manual dated 6th July 2012, reference: JINCLR05SCK rev A.

The appliance must be fitted with smoke control area kit JCLR0501.

Instruction manual dated 10th December 2012, reference: JINCLR06 rev B.

Instruction manual dated 6th July 2012, reference: JINCLR05SCK rev A.

The appliance must be fitted with smoke control area kit JCLR0501.

Instruction manual dated 4th October 2012, reference: JINHCN05 Rev B.

The valve plate adjusted by the secondary air control must contain six 5 mm holes.

The manufacturer's instructions entitled "Operating Instructions Clearview Vision/Vision Inset/Pioneer & Solution" dated 1st July 2006, reference: V1/42 stamped and signed "Smoke Control".

The appliance must be fitted with a tamperproof mechanical stop on the air slide/damper.

Installation instruction reference: IAV SE/EX 0726-6 611821 Lighting instruction BAV SE/EX 0717-2 611820.

A permanent stop must be in place on the air inlet to prevent closure beyond the 20% open position.

User manual dated 20th October 2011, reference: 611 820 BAV C500 SE/EX – 6.

Installation instruction manual dated 14th November 2012, reference: 811116 IAV SE-EX C556 – 2.

Supplementary instruction manual dated August 2011, reference: 811142 BAV GB – 3.

The appliance must be fitted with a system to prevent closure of the air control vent beyond the 20% open position.

Installation instruction reference: IAV SE/EX 0740-1 511911.

A permanent stop must be in place on the air inlet to prevent closure beyond the 20% open position.

User manual dated 20th October 2011, reference: 611 820 BAV C500 SE/EX – 6.

Installation instruction manual dated 15th November 2012, reference: 811117 1AV SE-EX C586 – 2.

Supplementary instruction manual dated August 2011, reference: 811142 BAV GB – 3.

The appliance must be fitted with a system to prevent closure of the air control vent beyond the 20% open position.

Instruction manual reference: 811064 BAV SE-EX C750/780-1.

The appliance must be fitted with a mechanical stop to prevent closure beyond the 28% open position.

Instruction manual reference: 811064 BAV SE-EX C750/780-1.

The appliance must be fitted with a mechanical stop to prevent closure beyond the 28% open position.

Instruction manual reference: 811064 BAV SE-EX C750/780-1.

The appliance must be fitted with a mechanical stop to prevent closure beyond the 28% open position.

Instruction manual dated 28th June 2011, reference: 811118 BAV SE-EX C800-1.

Supplementary operating instructions dated June 2011, reference: 811142 BAV GB-2.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 38% open position.

Instruction manual dated 3rd February 2012, reference 811164 BAV C i4 SE-EX-1.

Installation instruction manual dated 3rd June 2013, reference: 811191 IAV Ci4 FS GB-1.

Supplementary operating instruction manual dated August 2011, reference: 811142 BAV GB – 4.

The appliance must be fitted with a system to prevent closure of the air control vent beyond the 30% open position.

Instruction manual dated 4th July 2011, reference: 811136 BAV C i4 GB-1.

Supplementary operating instructions dated June 2011, reference: 811142 BAV GB-2.

The appliance must be fitted with a mechanical stop to prevent closure beyond the 28% open position.

Installation and lighting instruction manual dated November 2012, reference: 811175 IAC SE-EX Ci5-5.

Additional installation instruction manual dated 14th September 2012, reference: 811188 Kompletteranda IAV Ci5 – 2.

Supplementary instruction manual dated August 2011, reference: 811142 BAV GB – 4.

The appliance must be fitted with a system to prevent closure of the air control vent beyond the 30% open position.

Instruction manual dated 14th June 2013, reference: 811212 BAV SE-EX Ci30/Ci40-1.

Supplementary operating instruction manual dated January 2014, reference: 811142 BAV GB–5.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 27% open position.

Installation and Operating Instructions dated April 2014, reference: Version 1.0.

The appliance must be fitted with a modified secondary air supply that is fixed in the fully open position.

Instruction manual dated July 2009, reference: Cove2SR 07.09 Iss B.

A permanent stop must be in place on air control to prevent closure beyond 14 mm from the fully closed position.

Instruction manual dated February 2009, reference: Ver. 2.0 - QCSA2000XEN0209 [UK SMOKE CONTROL].

The optional multi-cyclone must be fitted.

Instruction manual dated 25th April 2014, reference: SL5SE issue 1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 15 mm open position.

Instruction manual dated 25th April 2014, reference: CBS8SE issue 1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 15 mm open position.

Instruction manual dated March 2012, reference: DM5 Issue 1.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 30% open position.

Operating instruction manual dated 2nd July 2013, reference: DM6 issue 1.

The appliance must be fitted with a mechanical stop to prevent secondary air spin wheel control closure beyond the 40% open position.

Operating instruction manual dated 2nd July 2013, reference: DMW5 issue 1.

The appliance must be fitted with a mechanical stop to prevent secondary air spin wheel control closure beyond the 40% open position.

Operating instruction manual dated 2nd July 2013, reference: HEM5SE issue.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 83 mm open position.

Instruction manual dated 25th April 2014, reference: HEM8SE issue 1.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 8 mm open position.

Instruction manual dated 25th April 2014, reference: HEMSL5SE issue 1.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 8 mm open position.

Operating instruction manual dated May 2013, reference: JR105SE Issue 1.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 83 mm open position.

Instruction manual dated November 2011, reference: 07DH8000A.

The appliance must be fitted with a UK kit for smokeless areas Design 800.

Instruction manual dated 2nd December 2011, reference: JINDLU04 Rev E.

Instruction manual dated 5th December 2011, reference: JINDLU04SCK rev B.

The appliance must be fitted with smoke control area kit JDLU0401.

Instruction manual dated 10th December 2012, reference: JINDLU05 Rev B.

Additional instruction manual dated 6th July 2012, reference: JINDLU05SCK Rev A.

The appliance must be fitted with smoke control area kit JDLU0501.

Instruction manual dated 10th December 2012, reference: JINDLU06 rev B.

Instruction manual dated 6th July 2012, reference: JINDLU05SCK rev A.

The appliance must be fitted with smoke control area kit JDLU0501.

Dik Geurts Instyle 500,

Dik Geurts Prostyle 500,

Dik Geurts Instyle 550, and

Dik Geurts Prostyle 550

5 kW inset roomheaters manufactured by DRU Verwarming B.V, Postbus 1021, 6920 BA, Duiven, Ratio 8, 6921 RW Duiven, The Netherlands

Installation instruction manual dated March 2014, reference: DRU392187-409050-NL-NL-0614-5.

User manual dated 19th June 2014, reference: DRU180452-363097-nl-NL-0614-3 1

Dik Geurts Instyle 600 and

Dik Geurts Prostyle 600

5 kW inset roomheaters, and

Dik Geurts Instyle 650 and Dik Geurts Prostyle 650

6kW inset roomheaters manufactured by DRU Verwarming B.V, Postbus 1021, 6920 BA, Duiven, Ratio 8, 6921 RW Duiven, The Netherlands

Installation Instruction manual dated June 2014, reference: DRU392187-410127-NL-NL-0614-3.

User manual dated 19th June 2014, reference: DRU180452-363097-nl-NL-0614-3. 1.

Dik Geurts Instyle 700 and

Dik Geurts Prostyle 700

10kW inset roomheaters manufactured by DRU Verwarming B.V, Postbus 1021, 6920 BA, Duiven, Ratio 8, 6921 RW Duiven, The Netherlands

Installation instruction manual dated June 2014, reference: DRU392187-408668-NL-NL-0314-7.

User manual dated 19th June 2014, reference: DRU180452-363097-nl-NL-0614-3. 1.

Dik Geurts Keld Low EA, Dik Geurts Keld High EA,

Dik Guerts Ivar Low EA,

Dik Guerts Ivar High EA, and

Dik Guerts Jannik Medium Low EA

5kW wood-burning stoves manufactured by DRU Verwarming B.V, Postbus 1021, 6920 BA, Duiven, Ratio 8, 6921 RW Duiven, The Netherlands

Installation manual dated 19th June 2014, reference: DRU392187-566405-nl-NL-0614-1 39.

User manual dated 19th June 2014, reference: DRU180452-363097-nl-NL-0614-3.

The appliance must be fitted with a modification to prevent closure of the secondary air control beyond the 22 mm open position.

Instruction manual dated 28th June 2012, reference: 08/51568/0 – Issue 3.

The appliance must be fitted with a mechanical stop to prevent secondary air control slider closure beyond the 40% open position.

Instruction manual dated August 2009, reference: SE Selborne 5 Issue 1.

The appliance must be fitted with a mechanical stop to prevent closure beyond the 50% open position.

225 MF Installation instructions.

Operating manual dated June 2013, reference: 03.27125.000.

Additional Instruction manual dated January 2014, reference: PM1030 Issue 2.

The appliance must be fitted with smoke control kit DV-225SCKIT.

The manufacturer's instructions, reference: PM 250 Issue 1.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 75% open position.

525 MF Installation instructions.

Operating manual dated February 2013, reference: 03.27109.100.

Smoke Control Kit additional installation and operating Instructions dated January 2014 reference: PM1030 Issue 2.

The appliance must be fitted with smoke control kit DV-225SCKIT.

Dovre Sense 100 (DV-SENSE100),

Dovre Sense 103 (DV-SENSE103),

Dovre Sense 200 (DV-SENSE200), and

Dovre Sense 203 (DV-SENSE203)

wood burning stoves manufactured by Dovre NV, Nijverheidsstraat 18, BE-2381 Weelde, Belgium

Sense installation instructions and operating manual dated July 2014, reference: 03.27151.000.

Smoke control kit additional Installation and operating Instructions for use in Smoke Control Areas dated July 2014, reference: PM1070 Issue 2.

The appliance must be fitted with a mechanical stop to prevent closure of the air control beyond the 8 mm open position.

Dovre Vintage 30 (DV-VIN30, DV-VIN30WH, DV-TBVIN30 and DV-TBVIN30WH),

Dovre Vintage 35 (DV-VIN35, DV-VIN35WH, DV-TBVIN35 and DV-TBVIN35WH), and

Dovre Vintage 50 (DV-VIN50, DV-VIN50WH, DV-TBVIN50 and DV-TBVIN50WH)

stoves manufactured by Dovre N.V. Nijverheidsstraat 18, B-2381 Weelde, Belgium

Instruction manual dated April 2011, reference: 03.27681.100.

Instruction manual dated May 2012, reference: PM813 Issue 1.

The appliance must be fitted with a permanent stop preventing closure of the secondary air supply beyond 50%.

Instruction manual dated February 2009, reference: EW1MF technical manual.

When the primary air control is in the closed position, it must remain permanently open by 5 mm and must be prevented from closing fully by a screw.

Instruction manual dated 28th January 2011, reference: 01/11/3.

The appliance must be fitted with a system to fix the secondary air (airwash) to a 4 mm open position.

Ecco Stove E730 Instruction manual dated 2nd January 2014, reference: 020114/D002.

The appliance must be fitted with a mechanical stop to prevent the secondary air control closing beyond the 4 mm open position. All other air controls must be permanently fixed in position.

Instruction manual dated October 2011, reference: cod. 004770900.

Supplementary information entitled "Clean Air Act 1993 and Smoke Control Areas" dated January 2012, reference: 004723000.

Instruction manual dated February 2011, reference: cod. 004770432.

Supplementary information entitled "Clean Air Act 1993 and Smoke Control Areas" dated January 2012, reference: 004723000.

Instruction manual dated 20th July 2011, reference: JINECO01 rev C.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Instruction manual dated 20th July 2011, reference: JINECO02 rev C.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Installation and Operating Instructions dated 20th June 2014, reference: JINECO05 RevB.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 40% open position.

Installation and Operating Instructions manual dated 14th February 2013, reference: JINECI08 Rev B.

Modification instructions dated 25th September 2013, reference: JINEC108 Slider Stop Rev B.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

Ekoheat 900 9.4kW,

Ekoheat 1500 15kW,

Ekoheat 2500 24.9kW, and

Ekoheat 4000 42.7kW pellet boilers manufactured by Ekopower ApS, Falstervej 285500, Middelfart, Denmark

Installation and operating instruction manual dated 4th July 2013, reference: Ekol Clarity 5 Manual 1.0.

The appliance must be modified to allow ingress of air through the secondary air control.

The appliance must be fitted with a stop in the tertiary air system to maintain a gap of 4 mm between the circular plates and the openings at the rear of the appliance measured by the maximum aperture resulting from the opening.

Installation and operating instruction manual dated 4th July 2013, reference: Ekol Clarity 12 Manual 1.0.

The appliance must be modified to allow ingress of air through the secondary air control.

The appliance must be fitted with a stop in the tertiary air system to maintain a gap of 4 mm between the circular plates and the openings at the rear of the appliance measured by the maximum aperture resulting from the opening.

Installation and operating instruction manual dated 4th July 2013, reference: Ekol Clarity Double Sided Manual 1.0.

The appliance must be modified so that when the primary and secondary air controls are fully closed they will be fixed in the 3.5 mm open position.

A tertiary air control system comprising two 7 mm holes on each side of the appliance and a fixed opening of 4 cm² on the underside of the stove must be implemented.

Installation and Operating Instructions dated 22nd January 2014, reference: Ekol Clarity 20 Boiler Wood Version, Manual Version 1.1.

The appliance must be fitted with a mechanical stop to prevent air wash control closure beyond the 25 mm open position and a stop preventing manual primary air control closure beyond the 2 mm open position.

Installation and Operating Instructions dated 22nd January 2014, reference: Ekol Clarity 30 Boiler Wood Version, Manual Version 1.1.

The appliance must be fitted with a mechanical stop to prevent air wash control closure beyond the 30 mm open position and a stop preventing manual primary air control closure beyond the 2 mm open position.

Installation and operating instruction manual dated 4th July 2013, reference: Ekol Inset 5 Manual 1.0.

The appliance must be modified so that when the secondary air supply is fully closed it will be fixed in the 4 mm open position.

Instruction manual dated 22nd December 2010, reference: 7196901-Rev 09.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 40% open position

Instruction manual dated October 2011, reference: 10/11 (PP) INSTR.ST-100DDSE/u.

The fitting of a system to prevent closure of the air controls beyond the 50% open position must be implemented.

Instruction manual dated August 2009, reference: Esse 125SE Issue 1.

The appliance must be fitted with a mechanical stop to prevent closure beyond the 50% open position.

Instruction manual dated 9th November 2010, reference: v45.

The primary air control must not be fully air tight when closed.

Installation and operation manual dated July 2010, reference: 1622/Integra INSET revision c.

The appliance must be fitted with a mechanical stop to fix the secondary air control fully open.

Instruction manual dated June 2011, reference: HACK20-200_Bedienung_2011-06_EN.

Integrated flue gas recirculation system must be used when using wood chips with a moisture content below 15%.

Instruction manual dated June 2011, reference: HACK20-200_Bedienung_2011-06_EN.

Integrated flue gas recirculation system must be used when burning wood pellets .

Operation manual dated 23rd June 2014, reference: 0000000079 V.003.

The integrated flue gas recirculation system must be used when using wood chips that have a moisture content below 15%.

Operation manual dated 23rd June 2014, reference: 0000000079 V.003.

The integrated flue gas recirculation system must be used when using wood pellets.

Instruction manual dated 9th January 2012, reference: MS10-11c.

The appliance must be fitted with a mechanical stop to prevent closure beyond the 40% open position.

Instruction manual dated 9th November 2011, reference: eVo 4&7 Inset MS11-11.

The appliance must be fitted with a system to prevent closure of the secondary air control beyond the 15 mm open position.

Instruction manual dated 8th July 2011, reference: eVo 5 MS07-11.

The appliance must be fitted with a system that prevents the closure of the air control beyond the 70% open position.

Instruction manual dated 9th November 2011, reference: eVo 4&7 Inset MS11-11.

The appliance must be fitted with a system to prevent closure of the secondary air control beyond the 8 mm open position.

Instruction manual dated April 2012, reference: FDC Issue 02.

The fitting of a system that prevents closure of the secondary air control slots beyond the 3.5 mm open position must be implemented.

Instruction manual dated March 2012, reference: FDCi Issue 06.

The fitting of a system that prevents closure of the secondary air control slots beyond the 3.5 mm open position must be implemented.

Instruction manual dated July 2012, reference: FDC issue 03.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 5 mm open position.

Instruction manual dated 22nd December 2010, reference: 7196801-Rev 07.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 40% open position.

Instruction manual dated May 2013, reference: EZKA / 12 / 090 – 2.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control beyond the 8 mm open position.

Firebird Smoke Exempt Inset Stove Instruction manual dated July 2014, reference: Print Revision 01: July 2014.

The appliance must be fitted with a mechanical stop to prevent closure of the air control beyond the 32 mm open position.

Instruction manual dated June 2011, reference: FF5CBII REV:A.

The appliance must be fitted with a mechanical stop to prevent secondary air closure beyond the 50% open position.

Instruction manual dated June 2011, reference: FF8CB REV:A.

The appliance must be fitted with a mechanical stop to prevent secondary air closure beyond the 50% open position.

Instruction manual dated March 2012, reference: Fgi.Fpi.Fxi Issue 06.

The fitting of a system that prevents closure of the secondary air control slots beyond the 3.5 mm open position must be implemented.

Instruction manual dated July 2012, reference: Fgi.Fpi.Fxi issue 07.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 1 mm open position.

Instruction manual dated March 2010, reference: Issue 03.

The appliance must be fitted with a system that prevents the closure of the secondary air control beyond the 3.5 mm open position.

Instruction manual dated March 2012, reference: FX.FP.Issue 06.

The fitting of a system that prevents closure of the secondary air control slots beyond the 7 mm open position must be implemented.

Instruction manual dated March 2012, reference: FxiT.FpiT.FgiT Issue 01.

The fitting of a system that prevents closure of the secondary air control slots beyond the 5 mm open position must be implemented.

Instruction manual dated March 2012, reference: Fgi.Fpi.Fxi Issue 06.

The fitting of a system that prevents closure of the secondary air control slots beyond the 9 mm open position must be implemented.

Instruction manual dated September 2012, reference: FX.FP. Issue 08.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 5 mm open position.

Installation and Operating Instructions manual dated January 2014, reference: Purevision Freestanding Issue 02.

The appliance must be fitted with a mechanical stop to prevent air supply closure beyond the 18 mm open position.

Installation and Operating Instructions manual dated January 2014, reference: Purevision Inset Issue 02.

The appliance must be fitted with a mechanical stop to prevent air supply closure beyond the 18 mm open position.

Installation and Operating Instructions manual dated January 2014, reference: Purevision Inset Issue 02.

The appliance must be fitted with a mechanical stop to prevent air supply closure beyond the 15 mm open position.

Installation and Operating Instructions manual dated January 2014, reference: Purevision Freestanding Issue 02.

The appliance must be fitted with a mechanical stop to prevent air supply closure beyond the 15 mm open position.

Installation and Operating Instructions manual dated January 2014, reference: Purevision Freestanding Issue 02.

The appliance must be fitted with a mechanical stop to prevent air supply closure beyond the 22mm open position.

Installation and Operating Instructions manual dated January 2014, reference: Purevision Inset Issue 02.

The appliance must be fitted with a mechanical stop to prevent air supply closure beyond the 22 mm open position.

Instruction manual dated 15th January 2013, reference: AL.

Instruction manual dated 1st February 2013, reference: AU.

The appliance must be fitted with a mechanical stop to prevent air control slots closure beyond the 6.5 mm open position.

Instruction manual dated 15th January 2013, reference: B1.

Instruction manual dated 1st February 2013, reference: BU. The appliance must be fitted with a mechanical stop to prevent air control slots closure beyond the 6.5 mm open position.

Instruction manual dated 15th January 2013, reference: CI.

Instruction manual dated 1st February 2013, reference: CU.

The appliance must be fitted with a mechanical stop to prevent air control slots closure beyond the 6 mm open position.

Instruction manual dated 15th January 2013, reference: LKI.

Instruction manual dated 1st February 2013, reference: LKU.

The appliance must be fitted with a mechanical stop to prevent air control slots closure beyond the 6.5 mm open position.

Installation manual "Instructions for Installation Firenzo Napier 4.8kW free standing wood burning stove" dated 24th January 2014, reference: UKNapierInstall/4.8/v1.

Instruction manual "User Instructions Firenzo Napier 4.8kW free standing wood burning stove" dated 24th January 2014, reference: UKNapierUser/4.8/v1.

The appliance must be fitted with a permanent stop to prevent closure of the air slide beyond the 7 mm open position.

Instruction manual dated 15th January 2013, reference: WI.

Instruction manual dated 1st February 2013, reference: WU.

The appliance must be fitted with a mechanical stop to prevent air control slots closure beyond the 6.5 mm open position.

Instruction manual dated 28th April 2012, reference: 10 KW SE Issue (6928) 2.

The appliance must be fitted with a stop that will only allow a minimum air gap 6 mm between the air control plate and the appliance when the secondary air is turned down to its minimum position.

Instruction manual dated 28th April 2012, reference: 4.5 KW SE Issue (6928) 1.

The appliance must be fitted with a stop that will only allow a minimum 3 mm air gap between the air control plate and the appliance when the secondary air is turned down to its minimum position.

Instruction manual dated 28th April 2012, reference: 6.5 KW SE Issue (6928) 3.

The appliance must be fitted with a stop that will only allow a minimum air gap 6 mm between the air control plate and the appliance when the secondary air is turned down to its minimum position.

Instruction manual dated 26th July 2012, reference: FW06C.

A permanent stop to prevent closure of the secondary air control beyond 20% open must be implemented.

Instruction manual dated 26th July 2012, reference: FW11C.

A permanent stop to prevent closure of the secondary air control beyond 20% open must be implemented.

Installation and operating instruction manual dated 2nd May 2013, reference: FW5i.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 3.5 mm open position.

Instruction manual dated 14th March 2012, reference: CH5K – V1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 18 mm open position.

Instruction manual dated 2014, reference: S600 –UK V1.

The appliance must be fitted with a permanent stop or other measure to prevent closure of the the air control beyond the 40% open position.

Instruction manual dated 17th November 2009, reference: 1295-3.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 25% open position.

Assembly instruction manual dated November 2008, reference: M0970208.

Operating instruction manual dated November 2008, reference: B0510108.

The manufacturer's installation manual dated November 2003, reference: M 060 01 03.

The manufacturer's operating manual dated August 2002, reference: 99229a.

Wood chip less than 35% moisture content and meeting ÖNORM M 7133: 1998 size class G30⁽¹⁾

Wood pellets of 6 mm diameter and a moisture content below 10%⁽¹⁾

The manufacturer's instruction manual dated November 2003, reference: M 060 01 03.

The manufacturer's operating manual dated August 2002, reference: 99229a.

Wood chip less than 35% moisture content and meeting ÖNORM M 7133: 1998 of either size class G30 or G50⁽¹⁾

Wood pellets of 6 mm diameter and a moisture content below 10%⁽¹⁾

Installation instruction manual dated September 2010, reference: M1130009.

Operating instruction manual dated September 2010, reference: B 067 00 09.

Installation, operation and maintenance manual dated 23rd July 2014, reference: BD-HPKI-R-999-01.1 Version 02/2014.

The appliance must be fitted with cyclone dust arrestment.

Gilles HPK-RA 160 manufactured by Gilles Energie und Umwelttechnik Gmbh, Koaserbauer Str. 16A-4810 Gmunden, Austria

Instruction and operation manuals dated November 2008, references:

BD 200-01a-01;

BD 200-01a-02;

BD 200-01a-03;

BD 200-01a-04;

BD 200-01a-06;

BD 200-03a-07; and

BD 200-03a-09

Instruction manual for Graphite 5 GR905 stove dated July 2014, reference: GR905 / /UK-NI-ROI / V3 18-07-14.

The appliance must be fitted with a mechanical stop to prevent closure of the main air control beyond the 50% open position.

Instruction manual for Graphite 8 GR908 stove dated July 2014, reference: GR908 / /UK-NI-ROI / V4-D 18-07-14.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

The appliance must be fitted with a door rope seal with a gap that is 70 mm in length.

Installation and operating instruction manual dated June 2013, reference: Greencast MF&WD Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

Installation and operating instruction manual dated June 2013, reference: Greencast MF&WD Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

Instruction manual dated 31st October 2011, reference: CH8K - V12.

The appliance must be fitted with a system that prevents closure of the air controls further than 40 mm from open.

Installation instructions, reference: IAV SE/EX 0811-4 511941 Lighting instructions BAV SE/EX H30 511942.

A permanent stop must be in place on the air inlet to prevent closure beyond the 45% open position.

Installation instructions, reference: IAV SE/EX 0737-4 511866 Lighting instruction BAV SE/EX 0717-1 511865.

A permanent stop must be in place on the air inlet to prevent closure beyond the 45% open position.

Harrie Leenders Cylon

Harrie Leenders Doran 160

Harrie Leenders Doran 190

Harrie Leenders Fuga S

Harrie Leenders Fuga eL

Harrie Leenders Stor

Harrie Leenders Signa

Stoves manufactured by Harrie Leenders, Industrieweg 255688, DP Oirschot, Netherlands

Instruction manual, reference: Supplementary Instructions Amended June 2010.

The appliance must be fitted with a mechanical stop to prevent closure of the air slide beyond the 15 mm open position

Manual dated April 2014, reference: 9980001529 V 05.1.

Additional Supplementary Installation Instructions Compact 25-80 dated July 2014, reference: IN1295.

Manual dated March 2013, reference: 9980001520 V.03.01.

Additional Supplementary Installation Instructions Compact 99-200 dated July 2014, reference: IN1296.

Operation Manual dated November 2011, reference: Manual ref: 99800001036.

Additional Supplementary Installation Instructions K and R Series dated January 2014, reference: IN2014.

Manual dated August 2011, reference: 9980000819.

Additional Supplementary Installation Instructions K and R Series dated January 2014, reference: IN2014.

Instruction manual dated January 2013, reference: HD TR Freestanding .Issue 01.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 5 mm open position.

Instruction manual dated July 2012, reference: TRc issue 03.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 1 mm open position.

Instruction manual dated April 2012, reference: TRc Issue 02.

The fitting of a system that prevents closure of the secondary air control slots beyond the 3.5 mm open position must be implemented.

Instruction manual dated April 2012, reference: TRiT Issue 01.

The fitting of a system that prevents closure of the secondary air control slots beyond the 5 mm open position must be implemented.

Instruction manual dated April 2012, reference: TRc Issue 02.

The fitting of a system that prevents closure of the secondary air control slots beyond the 9 mm open position must be implemented

Instruction manual dated November 2012, reference: Version 1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control slots beyond the 50% open position.

User manual dated May 2013, reference: Version 2.0.

The appliance must be fitted with a mechanical stop to prevent closure of secondary air control slot beyond the 30% open position.

User manual dated June 2013, reference: Version 2.0.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control slot beyond the 40% open position.

Assembly and installation instructions entitled "HERZ firematic 20 – 101 BioControl", reference: 04.001.

Installation instructions entitled "Herz Firematic (1Ph) 20-101".

Operating instructions entitled "HERZ firematic 20 - 101 BioControl", reference: Betriebsanleitung firematic 20-101 BioControl Englisch V 2.53.doc.

Assembly and installation

instructions entitled

"HERZ firematic 20 - 101 BioControl", reference: 04.001.

Installation Instructions "Herz Firematic (1Ph) 20-101".

Operating instructions entitled

"HERZ firematic 20 - 101 BioControl", reference: Betriebsanleitung firematic 20-101 BioControl Englisch V 2.53.doc

Installation and Operating Instructions manual dated 30th June 2014, reference: Hestia EVA5/A7 Issue 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air slide beyond the 23 mm open position.

Installation and Operating Instructions manual dated 30th June 2014, reference: Hestia EVA5/A7 Issue 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air slide beyond the 50 mm open position.

Operating and installation manual dated January 2013, reference: Pevex1020/AH/ver1.

The appliance must be fitted with a permanent stop to prevent closure of the air control valve beyond the 41% open position.

Instruction manual dated June 2011, reference: Pevex1005/AH/ver2.

The appliance must be fitted with permanent stops to ensure that the primary and secondary air controls do not close beyond 95% and 50% respectively.

Instruction manual dated June 2011, reference: Pevex1006/AH/ver2.

The appliance must be fitted with permanent stops to ensure that the primary and secondary air controls do not close beyond 95% and 50% respectively.

Instruction manual dated January 2013, reference: Pervex1019/AH/ver1.

The appliance must be fitted with a permanent stop to ensure that the air control does not close beyond the 31% open position.

Instruction manual dated January 2013, reference: Pevex1018/AH/ver1.

The appliance must be fitted with a permanent stop to ensure that the air control does not close beyond the 52% open position.

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

The appliance must be fitted with a permanent stop to ensure that the air control does not close beyond the 31% open position.

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

The appliance must be fitted with a permanent stop preventing closure of the air control beyond the 31% open position.

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

A permanent stop fixing the air control to 31% open when fully closed must be implemented.

Heta Scanline 820 with baking oven and ceramic,

Heta Scanline 820 with thermastone and ceramic,

Heta Scanline 820 with shelf and top in sandstone and

Heta Scanline 820 with shelf (and) ceramic

wood-burning stoves manufactured by Heta A/S, Jupitervej 22, 7620 Lemvig, Denmark

Instruction manual dated January 2013, reference: Pervex1019/AH/ver1.

The appliance must be fitted with a permanent stop preventing closure of the air control beyond the 31% open position.

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

A permanent stop fixing the air control to 31% open when fully closed must be implemented.

Heta Scanline 830 with extra thermastone and top in soapstone and

Heta Scanline 830 with extra thermastone and ceramic wood-burning stoves manufactured by Heta A/S, Jupitervej 22, 7620 Lemvig, Denmark

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

The appliance must be fitted with a permanent stop preventing closure of the air control beyond the 31% open position.

Heta Scanline 840 high ash door, shelf and ceramic, Heta Scanline 840 high ash door thermastone and ceramic and

Heta Scanline 840 high ash door baking oven and ceramic wood-burning stoves manufactured by Heta A/S, Jupitervej 22, 7620 Lemvig, Denmark

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

The appliance must be fitted with a permanent stop preventing closure of the air control beyond the 31% open position.

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

A permanent stop fixing the air control to 31% open when fully closed must be implemented.

Heta Scanline 850 on column and ceramic and

Heta Scanline 850 on turntable column and ceramic

wood-burning stoves manufactured by Heta A/S, Jupitervej 22, 7620 Lemvig, Denmark

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

The appliance must be fitted with a permanent stop preventing closure of the air control beyond the 31% open position.

Instruction manual dated January 2013, reference: Pevex1019/AH/ver1.

A permanent stop fixing the air control to 31% open when fully closed must be implemented.

Instruction manual for Hi-flame Inset convector dated June 2014, reference: HF5902/ UK-NI-ROI / V3.18-07-14.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 5 mm open position.

Instruction manual dated 11th February 2013, reference: ENVIRO 3 DB005.

The appliance must be fitted with a system preventing closure of the secondary air control beyond the 3 mm open position.

Instruction manual dated 2nd February 2013, reference: ENVIRO 5 DB002.

The appliance must be fitted with a system preventing closure of the secondary air controls beyond the 3 mm open position.

Installation and operating instructions manual dated 15th June 2012, reference: ENVIRO 7 DB001.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air-wash beyond 2 mm.

Four fixed 5 mm diameter air holes must be provided for the tertiary air supply.

Instruction manual dated February 2013, reference: GB12A Version 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air slider beyond the 23 mm open position.

Instruction manual dated February 2013, reference: GB12A Version 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air slider beyond the 50 mm open position.

Instruction manual dated 17th July 2013, reference: HW1MF 0101.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air slider beyond the 5 mm open position.

The tertiary air openings at the rear of the appliance must be fixed in the 50% open position.

Instruction manual dated July 2012, reference: AL905-SE/UK-NI-ROI/V2-D.18-07-12.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 3 mm open position.

Instruction manual dated June 2011, reference: HF905/UK-NI-ROI/V2.1-06-11.

The appliance must be fitted with a mechanical stop to prevent closure of the main air control beyond the 50% open position.

Instruction manual dated July 2012, reference: HF907-SE/UK-NI-ROI/V3-D. 14-07-12.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position, and a 70 mm opening of the door rope seal to allow a constant flow of air.

Instruction manual dated 26th July 2012, reference: HH06C.

A permanent stop to prevent closure of the secondary air control beyond 20% open must be implemented.

Instruction manual dated 26th July 2012, reference: HH11C.

A permanent stop to prevent closure of the secondary air control beyond 20% open must be implemented.

Installation and operating instruction manual dated 2nd May 2013, reference: HHB468SE.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 5 mm open position.

Installation and operating instruction manual dated 2nd May 2013, reference: HHB5i.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 3.5 mm open position.

Installation and operating instruction manual dated 2nd May 2013, reference: HHB468SE.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beond the 25% open position.

Installation and operating instruction manual dated 2nd May 2013, reference: HHB468SE.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 75% open position.

Installation and operating instruction dated 2nd May 2013, reference: HH5i.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 3.5 mm open position.

Instruction manual dated 3rd July 2008, reference: Hoval Operating instructions, wood pellet heating boiler BioLyt (50, 70, 120, 140, 160).

Instruction manual dated 3rd October 2009, reference: Technical information Assembly instructions.

Installation and operating manuals dated June 2007, references:

4 204 794/01; and

4 204 793/2

Installation and operation manual dated November 2007, reference: STU man/01; or

Installation and operation manual dated June 2008, reference: STU/man/01/1

Installation and operation manual dated November 2007, reference: STU/man/01, or

Installation and operation manual dated June 2008, reference: STU/man/01/1

Instruction manual dated 10th October 2012, reference: JINAVI05 Rev B.

The valve plate adjusted by the secondary air control must contain six 5 mm holes.

Installation and Operating Instructions dated 20th June 2014, reference: JINHCR06 RevB.

The appliance must be fitted with a modified top air plate with 9 additional 5 mm holes and the tertiary air aperture permanently fixed to the 60% open position.

Instruction manual dated 22nd September 2011, reference: JINHH04 rev C.

Instruction manual dated 22nd July 2011, reference: JINHH04&HHC05 Slider Stop rev A.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Instruction manual dated 22nd September 2011, reference: JINHHC05 rev C.

Instruction manual dated 22nd July 2011, reference JINHH04&HHC05 Slider Stop rev A.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Instruction manual dated 2nd December 2011, reference: JINHVR04 Rev E.

Instruction manual dated 5th December 2011, reference: JINHVR04SCK revB.

The appliance must be fitted with smoke control area kit JHVR0401.

Installation and Operating Instructions manual dated 14th February 2013, reference JINAVI08 Rev B.

Modification instructions dated 25th September 2013, reference: JINAV108 Slider Stop Rev B.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

Installation and Operating Instructions manual dated 5th February 2013, reference: JINTDI08 Rev B.

Modification instructions dated 25th September 2013, reference: JINTD108 Slider Stop Rev B.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

Installation and Operating Instructions dated 20th June 2014, reference: JINHRR05 RevB.

The appliance must be fitted with a modified top air plate with 8 additional 5 mm holes.

Instruction manual dated 10th October 2012, reference: JINTDI05 Rev B.

The valve plate adjusted by the secondary air control must contain six 5 mm holes.

The manufacturer's instruction manual reference: PM 249 Issue 1.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 75% open position.

Euroheat Distributors (HBS) Limited's operational instructions dated November 2006, reference: IN1141 Ed B.

The appliance must be fitted with a mechanism to prevent closure of the air wash/secondary air control.

Euroheat Distributors (HBS) Limited's operational instructions dated November 2006, reference: IN1141 Ed B.

The appliance must be fitted with a mechanism to prevent closure of the air wash/secondary air control.

Instruction manual dated 22nd December 2010, reference: 6096801-Rev. 17.

A mechanical stop to prevent closure of the secondary air control beyond the 40% open position must be fitted.

Instruction manual dated 22nd December 2010, reference: 6096801-Rev. 17.

A mechanical stop to prevent closure of the secondary air control beyond the 40% open position must be fitted.

Instruction manual dated 22nd December 2010, reference: 6096801-Rev. 17.

A mechanical stop to prevent closure of the secondary air control beyond the 40% open position must be fitted.

Instruction manual dated August 2012, reference: "Interra 60-68-74-78 Instruction for Installation and use" UK08/2012.

The unit must be fitted with a permanent stop.

Instruction manual dated September 2002, reference: 129980

Smoke control area modification dated 2010, reference: UK F100 SC appendix.

The appliance must be fitted with a permanent stop that prevents the closure of the secondary air control beyond the 50% open position.

Instruction manual dated January 2011, reference: Jotul F162/F162C/F163 Manual Version Po6.

Supplementary instruction manual dated 1st January 2012, reference: Jotul F162/F163/262/263 SMOKE.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

Instruction manual dated November 2013, reference: KIS-580 02 03 Version P02.

Instruction manual dated 3rd June 2014, reference: Jøtul I520 Series SMOKE.

A permanent stop to fix the secondary air control to 980 mm² in its minimum position must be implemented.

Instruction user manual entitled "Country001" dated June 2011, reference: Jydepejsen A/S - June 2011.

A permanent stop must be fitted to the secondary air control such that it cannot be closed less than 35%.

Instruction manual dated 8th January 2014, reference: NS 5-6 Issue 1.

The tertiary air control must be fully open when burning wood.

Instruction manual dated 1st January 2005, reference: ID 103689-L English

Instruction manual reference: ID: 103708-G English

Instruction manual dated 1st January 2005, reference:

ID 104646-D English

Instruction manual reference: ID: 104642-B English

Instruction manual dated 1st January 2005, reference:

ID 104646-D English

Instruction manual reference: ID: 104642-B English

Instruction manuals dated 1st January 2005, reference:

ID 104654-H English

Instruction manual reference: ID: 106811-H English

Instruction manual dated 1st January 2005, reference:

ID 104661-F English

Instruction manual reference: ID: 105174-F English

The appliance must be fitted with multicyclone dedusters.

Only when used with a Glosfume model BMF 208 ceramic particulate filter.

The Green energy engineering Ltd (GEE) KOZ550 pellet boiler owner/operator's manual dated December 2010, reference: version 1A 2010.

The Glosfume Ltd maintenance and instruction manual for Glosfume BMF Biomass Filter units (50 – 100 kW) dated December 2010, reference: version AEE001-VER 4

Service manual dated 25th May 2012, reference: QPP051-2.

Instructions for operation manual dated 25th May 2012, reference: QPP049-3

Operation manual dated May 2011, reference: B KWB Easyfire EN, 05.2011.

Installation manual dated May 2011, reference: M KWB Easyfire, 05.2011

Instruction manual dated 18th December 2012, reference: LF6cT-1.

The appliance must be fitted with a mechanical stop to prevent closure of the air control slots beyond the 21 mm open position.

Instruction manual dated 11th October 2012, reference: Fireplace insert, Lotus H370 Petite Version 1.

A mechanical stop to prevent closure of the air damper beyond the 5 mm open position must be implemented.

Instruction manual dated July 2012, reference: Mendip Stoves Ltd, 2012, ver 3.

A permanent stop to fix the secondary air control such that it cannot be closed more than 25% open must be implemented.

Instruction manual dated July 2012, reference: Mendip Stoves Ltd, 2012, ver 3.

A permanent stop such that the secondary air "closed position" results in a 2.5 mm gap in the two secondary air openings must be implemented.

Instruction manual dated July 2012, reference: Mendip Stoves Ltd, 2012, ver 3.

A permanent stop on the secondary air control such that it cannot be closed more than 35% open must be implemented.

Technical manual dated 17th October 2013, reference: MV1MF 0101.

The appliance must be fitted with a stop to prevent closure of the primary air control beyond the 5 mm open position.

Instruction manual dated 20th December 2011, reference: INK.00.7927.

All appliances must be fitted with a modification to the secondary air control to ensure that the air supply holes remain 3 mm open.

Instruction manual dated 27th July 2012, reference: Manual Version 1.3.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 10 mm open position.

Operation and installation manual dated 9th August 2014, reference: Mendip Stoves Ltd, 2013, Burcott v4.

The appliance must be fitted with a stop to prevent closure of the secondary air control beyond the 25% open position.

Instruction manual dated June 2014, reference: "Mendip Stoves Limited, 2014. Christon Insets v1 06.2014".

The appliance must be fitted with a permanent stop or other measure to prevent closure of the the air control beyond the 40% open position.

Operation and Installation Manual dated May 2014, reference: Mendip Stoves Ltd, somerton 2. 2013, ver 2.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 25% open position.

Installation and operation instruction manual dated 16th July 2013, reference: MerlinST-C&D_v1.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 50 mm open position.

Instruction manual dated 18th November 2010, reference: CH4K Milan-V2.

The appliance must be fitted with a system to prevent closure of the air control beyond the 25 mm open position.

Instruction manual dated 18th November 2010, reference: CH6K Milan-V2.

The appliance must be fitted with a system to prevent closure of the air control beyond the 40 mm open position.

Instruction manual dated 4th May 2010, reference: 1303 -1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond 4 mm from closed.

Instruction manual dated 15th October 2012, reference: Lotus-Mondo Series Stoves Version 1.

A mechanical stop to prevent closure of the air dampers beyond the 8 mm open position must be implemented.

Instruction manual dated January 2010, reference: 09TJD.

The appliance must be fitted with a system that prevents the closure of the secondary air flaps beyond the 8 mm open position.

Instructions for installation and use dated August 2014, reference: 72746400.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control inlet beyond 22 mm open position.

Instructions for installation and use dated August 2014, reference: 72746400.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control inlet beyond the 22 mm open position.

Instructions for installation and use dated August 2014, reference: 72797500.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control inlet beyond the 25% open position.

Instructions for installation and use dated August 2014, reference: 72797500.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control inlet beyond 25% open position.

Instruction manual dated 22nd January 2014, reference: Solid Fuel Central Heating Stoves Manual Issued - 22/01/2014 (459).

Supplementary Soliftec Smoke Advice Sheet dated 22nd January 2014, reference: Soliftec Smoke Advice Sheet no1.

Instructions for installation and use 7600 dated 14th July 2010, reference: 72762200.

Reference drawings Morsø 7600-137, 7600-138, 7600-139, 7600-140 and 7600-141.

Instruction manuals dated 1st February 2010, references:

Ø- Collection; and

72000400.

The appliance must have been manufactured after 1st February 2010 and must be fitted with a system that prevents closure of the air control slider beyond the 10 mm open position.

Euroheat Distributors (HBS) Limited's operation instructions dated June 2010, reference: IN1116 Edition D5.

The minimum air bleed flap must be set at a minimum of 14.5 mm.

Euroheat Distributors (HBS) Limited's operation instructions dated June 2010, reference: IN1116 Edition D5.

The minimum air bleed flap must be set at a minimum of 14.5 mm

Euroheat Distributors (HBS) Limited's operation instructions dated June 2010, reference: IN1214 Edition B.

The minimum air bleed flap must be set at a minimum of 14.5 mm

Euroheat Distributors (HBS) Limited's operation instructions dated June 2010, reference: IN1180 Edition D1.

The minimum air bleed flap must be set at a minimum of 14.5 mm.

Instruction manual dated 5th July 2011, reference: EGTL05 Version 1.4.

The appliance must be fitted with a permanent stop to prevent any closure of the tertiary air control.

Instruction manual dated January 2013, reference: Pevex 1012/AH/ver1.

A permanent stop must be implemented ensuring a minimum opening area of 1 cm² for the primary air slider when in the fully closed position and a tertiary air inlet area of 4 cm².

Instruction manual dated January 2013, reference: Pevex1015/AH/ver1.

The appliance must be fitted with permanent stops that ensure the secondary and tertiary air controls do not close beyond 1.1 cm open and 2 cm open positions respectively.

Installation and user manual dated 1st January 2013, reference: PM1081 Issue 1.

Additional Installation and user instructions for use in Smoke Control Areas dated July 2014, reference: PM1066 Issue 2.

The appliance must be fitted with a mechanical stop to prevent air vent control closure beyond the 7 mm open position.

Installation and user manual dated 13th May 2013, reference: PM1083 Issue 1.

Additional Installation and user instructions for use in Smoke Control Areas dated July 2014, reference: PM1112 Issue 1.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 28% open position.

User manual dated 3rd September 2012, reference: PM1084 Issue 1.

Additional Installation and user instructions for use in Smoke Control Areas dated July 2014, reference: PM1068 Issue 1.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 8 mm open position.

User manual dated 15th January 2013, reference: PM1089 Issue 1.

Additional Installation and user instructions for use in Smoke Control Areas dated July 2014, reference: PM1068 Issue 1.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 8 mm open position.

Installation and user manual dated 14th May 2013, reference: PM1082 Issue 1.

Additional Installation and user instructions for use in Smoke Control Areas dated July 2014, reference: PM1111 Issue 1.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 38% open position.

Instruction manual dated January 2011, reference: Cleanburn, Nørreskoven MkII multifuel stove installation and operating instructions, v01.11.

The appliance must be fitted with stop to prevent closure of secondary air control beyond 40%.

Instruction manual dated 12th September 2011, reference: EGTL05A Version 1.5.

The appliance must be fitted with a permanent stop to prevent any closure of the tertiary air control

Installation instructions dated 19th April 2010, reference: version 1.1.

Operating manual dated 10th May 2010, reference: version 10.051.

Instruction manual dated June 2011, reference: HF217-SE/UK-NI-ROI/V2.16-06-11.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 3 mm open position.

Instruction manual dated November 2011, reference: 07DH8000A.

The appliance must be fitted with a UK kit for smokeless areas OPTI IF 800.

GR 100 and OT

100

Instruction manual dated 18th July 2013, reference: Osby Parca P500 Type P30 biomass O & M: Version 1.

The appliance must have a management system designed so that the boiler will only operate at 100% of the rated output.

Instruction manual dated 2nd December 2011, reference: JINCAP04 Rev E.

Instruction manual dated 5th December 2011, reference: JINCAP04SCK rev B.

The appliance must be fitted with smoke control area kit JCAP0401.

Instruction manual dated 10th December 2012, reference: JINCAP05 Rev B.

Instruction manual dated 6th July 2012, reference: JINCAP05SCK rev A.

The appliance must be fitted with smoke control area kit JCAP0501.

Instruction manual dated 10th December 2012, reference: JINCAP06 rev B

Instruction manual dated 6th July 2012, reference: JINCAP05SCK rev A

The appliance must be fitted with smoke control area kit JCAP0501.

Instruction manual dated 10th October 2012, reference: JINCH105 rev B.

The valve plate adjusted by the secondary air control must contain six 5 mm holes.

Installation and Operating Instructions dated 20th June 2014, reference: JINCNS04 RevB.

The appliance must be fitted with a modified top air plate with 9 additional 5 mm holes, and the tertiary air aperture permanently fixed to the 60% open position.

Instruction manual dated 22nd September 2011, reference: JINCNC05 rev C.

Instruction manual dated 22nd July 2011, reference: JINCND05&CNC05 Slider Stop rev A.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Instruction manual dated 22nd September 2011, reference: JINCND05 rev C.

Instruction manual dated 22nd July 2011, reference: JINCND05&CNC05 Slider Stop revA.

The appliance must be fitted with a permanent stop that prevents closure of the secondary air slider beyond 30% open.

Installation and Operating Instructions dated 20th June 2014, reference: JINDER05 RevB.

The appliance must be fitted with a modified top air plate with 8 additional 5 mm holes.

Installation and Operating Instructions manual dated 7th February 2013, reference: JINCHI08 Rev B.

Modification instructions dated 25th September 2013, reference: JINCH108 Slider Stop Rev B.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 20% open position.

Installation instructions dated 2nd September 2005, reference: version 020905.

Operating manual dated 27th September 2006, reference: version 270906.

Installation and operating instruction manual dated May 2013, reference: Her/Mod M&W Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

Installation and operating instruction manual dated May 2013, reference: Her/Mod M&W Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

Instruction manual dated January 2013, reference: Pevex1016/AH/ver1.

A permanent stop fitted to the secondary air supply that does not allow the slider to be shut off completely and remains open by 40% of its full travel whilst the tertiary air remains open by 100% must be implemented.

Instruction manual dated June 2011, reference: Pevex1004/AH/ver2/.

The appliance must be fitted with permanent stops that ensure the primary and tertiary air controls do not close beyond 0.5 cm open and 2 cm open positions respectively.

Instruction manual dated June 2011, reference: Pevex1003/AH/ver2.

The appliance must be fitted with permanent stops that ensure the secondary and tertiary air controls do not close beyond 1.1 cm open and 2 cm open positions respectively.

Instruction manual reference: Solid Fuel Stoves Manual issued - 20/08/2009 (291) 2.

The appliance must be used with a modification to the secondary air slide which inhibits closure further than the 25 mm from the left position.

Instruction manual reference: Solid Fuel Stoves Manual issued - 20/08/2009 (291) 2.

The appliance must be used with a modification to the secondary air slide which inhibits closure further than the 20 mm from the left position.

Instruction manual dated 22nd January 2014, reference: "Portway solid fuel heating stoves wood burning models. Wood Fuel Stoves Manual v1".

Advice sheet dated 22nd January 2014, reference: Soliftec Smoke Advice Sheet no1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 7 mm open position.

Instruction manual reference: Solid Fuel Stoves Manual issued - 20/08/2009 (291) 2.

A modification of the secondary air control must be implemented such that the 20 mm from left position is maintained during use. In addition the primary air control must be modified such that the minimum setting allows a bleed of air to pass through

Instruction manual dated January 2014, reference: Instructions for installation, use and maintenance Rais 500 Revision 5.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 15% open position.

Instruction manual dated January 2014, reference: Instructions for installation, use and maintenance Rais 900 Revision 1.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 5% open position.

Instruction manual dated January 2014, reference: Instructions for installation, use and maintenance Rais Poleo 2 & Rais Epoca 2 Revision 1.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 30% open position.

Instruction manual dated January 2014, reference: Instructions for installation, use and maintenance Rais Rina, Rais Viva & Rais Juno Rev 6.

The appliance must be fitted with a mechanical stop to prevent closure of the air damper beyond the 8.5 mm open position.

Instruction manual dated January 2014, reference: Instructions for installation, use and maintenance Rais Q-Tee 2 Revision 1.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 48% open position.

Instruction manual dated 28th June 2011, reference: Manual for RAIS Q-Tee Revision 1.

Supplementary instructions dated 7th July 2011, reference: Rais Q-Tee.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 11.7 mm open position.

Instruction manual dated 28th June 2011, reference: Manual for RAIS Q-Tee Revision 1.

Supplementary instructions dated 7th July 2011, reference: Rais Q-Tee.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 11.7 mm open position.

Instruction manual dated 28th June 2011, reference: Manual for RAIS Q-Tee Revision 1.

Supplementary instructions dated 7th July 2011, reference: Supplementary instructions Rais Q-Tee.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 11.7 mm open position.

Instruction manual dated 7th December 2012, reference: Manual for RAIS Q-Tee Revision 2.

Supplementary instructions dated 31st January 2013, reference: Supplementary Instructions Rais Rev.3.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the 11.7 mm open position.

Instruction manual dated 29th August 2011, reference: Manual for RAIS Rina, RAIS Viva.

Supplementary instructions dated 27th September 2011, reference: Supplementary Instructions Rais.

The appliance must be fitted with a mechanical stop to prevent closure of the air damper beyond the 8.5 mm open position.

The manufacturer's instruction manual dated July 2008, reference: PM 247 Issue 1.

Instruction manual dated January 2009, reference: PM280 Issue 1

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50% open position

Instruction manual dated August 2009, reference: PM235 Issue 2.

Smoke control kit instruction manual dated January 2010, reference: PM375 Issue 2.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated August 2009, reference: PM226 Issue 2.

Smoke control kit instruction manual dated January 2010, reference: PM375 Issue 2.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated June 2012, reference: PM375 Issue 5.

Instruction manual dated June 2012, reference: PM235 Issue 5. A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated June 2012, reference: PM375 Issue 5.

Instruction manual dated June 2012, reference: PM235 Issue 5. A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position and the primary air control fixed to allow a bleed of air to enter the firebox from underneath the grate.

Instruction manual dated August 2009, reference: PM226 Issue 2.

Smoke control kit instruction manual dated January 2010, reference: PM375 Issue 2.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position and the primary air control fixed to allow a bleed of air to enter the firebox from underneath the grate.

Instruction manual dated August 2009, reference: PM235 Issue 2.

Smoke control kit instruction manual dated January 2010, reference: PM375 Issue 2.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position and the primary air control fixed to allow a bleed of air to enter the firebox from underneath the grate.

Instruction manual dated June 2009, reference: PM231 Issue 3.

Smoke control kit instruction manual dated November 2009, reference: PM402 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 25% open position.

Instruction manual dated June 2010, reference: PM452 Issue 1.

Smoke control kit instruction manual dated June 2010, reference: PM400 Issue 3.

A permanent stop must be positioned to prevent closure of the secondary air control below the 45% open position and the primary air control fixed to prevent full closure to allow a bleed of air to enter the firebox at the base of the fuel bed.

Instruction manual dated October 2009, reference: PM274 Issue 2.

Smoke control kit instruction manual dated November 2009, reference: PM400 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 45% open position and the primary air control fixed to prevent full closure to allow a bleed of air to enter the firebox at the base of the fuel bed.

Instruction manual dated June 2010, reference: PM452 Issue 1.

Smoke control kit instruction manual dated June 2010, reference: PM400 Issue 3.

A permanent stop must be positioned to prevent closure of the secondary air control below the 25% open position and the primary air control fixed to prevent full closure to allow a bleed of air to enter the firebox at the base of the fuel bed.

Instruction manual dated October 2009, reference: PM274 Issue 2.

Smoke control kit instruction manual dated November 2009, reference: PM400 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 25% open position and the primary air control fixed to prevent full closure to allow a bleed of air to enter the firebox at the base of the fuel bed.

Instruction manual dated October 2012, reference: PM400 Issue 4.

Instruction manual dated August 2012, reference: PM274 Issue 9.

The appliance must be fitted with Smoke Control Kit RVS500SCKIT to prevent secondary air closure beyond the 50% open position.

Instruction manual dated October 2012, reference: PM935 Issue 1.

Instruction manual dated August 2012, reference: PM904 – Issue 1.

The appliance must be fitted with Smoke Control Kit RVS-2DSSCKIT to prevent secondary air closure beyond the 91 mm open position.

Industrial manual dated October 2012, reference: PM400 Issue 4.

Instruction manual dated August 2012, reference: PM452 Issue 3.

The appliance must be fitted with Smoke Control Kit RVS500SCKIT to prevent secondary air closure beyond the 50% open position.

Instruction manual dated October 2009, reference: PM278 Issue 2a.

Smoke control kit instruction manual dated January 2010, reference: PM401 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 25% open position.

Instruction manual dated October 2009, reference: PM278 Issue 2a.

Smoke control kit instruction manual dated January 2010, reference: PM401 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated 11th January 2012, reference: Issue No. 04.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 30% open position.

Rosedale Smoke Control Stove Installation and User Instructions "Issue 1" dated 1st May 2010.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 50% open position.

Instruction manual dated September 2011, reference: cod. 0047700880.

Supplementary information entitled "Clean Air Act 1993 and Smoke Control Areas" dated January 2012, reference: 004723000.

Instruction manual dated March 2013, reference: 0901SE.

The secondary air rotating plate must be modified such that it cannot be closed further than the 4 mm open position.

The primary air spin wheel must be modified to prevent closure beyond the 1 half turn open position.

Installation and Operating Instructions dated 22nd January 2014, reference: Saltfire Aquaburn 20 Boiler Wood Version, Manual Version 1.1.

The appliance must be fitted with a mechanical stop to prevent air wash control closure beyond the 25 mm open position and a stop preventing manual primary air control closure beyond the 2 mm open position.

Installation and Operating Instructions dated 22nd January 2014, reference: Saltfire Aquaburn 30 Boiler Wood Version, Manual Version 1.1.

The appliance must be fitted with a mechanical stop to prevent air wash control closure beyond the 30 mm open position and a stop preventing manual primary air control closure beyond the 2 mm open position.

Installation and operating instruction manual dated 4th July 2013, reference: Saltfire Double Sided DS1 Manual 1.0.

The appliance must be modified to prevent closure of the primary and secondary air controls beyond the 3.5 mm open position.

A tertiary air control system comprising two 7 mm holes on each side of the appliance and a fixed opening of 4 cm² on the underside of the stove must be implemented.

Instruction manual dated 15th December 2011, reference: Evoview12 Manual 1.0.

The appliance must be fitted with a mechanical stop to prevent closure of the tertiary air control beyond the 4 mm open position.

Instruction manual dated 15th December 2011, reference: Evoview5 Manual 1.0.

The appliance must be fitted with a mechanical stop to prevent closure of the tertiary air beyond the 4 mm open position.

Installation and Operating Instructions dated 22nd January 2014, reference: Saltfire ST1, A.K.A Fireglow ST1, A.K.A. Ultimo ST1, Manual Version 1.1.

The appliance must be fitted with mechanical stop to prevent air wash control closure beyond the 22 mm open position and a stop to prevent secondary air control closure beyond the 50% open position.

Installation and Operating Instructions dated 22nd January 2014, reference: Saltfire ST2, A.K.A Fireglow ST2, A.K.A. Ultimo ST2, Manual Version 1.1.

The appliance must be fitted with a mechanical stop to prevent air wash control closure beyond the 7 mm open position and a stop to prevent tertiary air control closure beyond the 20% open position.

Instruction manual dated 25th July 2012, reference: SR468SE.

The fitting of a system to prevent closure of the secondary air control beyond 5 mm open must be implemented

Instruction manual dated 25th July 2012, reference: SR468SE.

The fitting of a system to prevent closure of the secondary air control beyond 75% from closed must be implemented.

Instruction manual dated 25th July 2012, reference: SR468SE.

The fitting of a system to prevent closure of the secondary air control beyond 25% from closed must be implemented.

Installation and operating instruction manual dated 2nd May 2013, reference: SR5i.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 3.5 mm open position.

Instruction manual Assembly and Operation Manual dated 12th December 2013, reference: Version TOP/SASP/V.1.1

The appliance must be fitted with the manufacturer's multi-cyclone.

Installation and operating Instructions manual dated October 2012, reference: 10026402 -P01.

Addendum to installation and operating instructions manual dated 5th June 2014, reference: SMOKEA8-2.

Smoke control kit SMOKEA8-2 must be fitted to prevent closure of the air control beyond the 25% open position.

Scan 58-1, Scan 58-1 Wall,

Scan 58-2, Scan 58-2 Wall,

Scan 58-3, Scan 58-3 Wall,

Scan 58-4, Scan 58-4 Wall,

Scan 58-5, Scan 58-5 Wall,

Scan 58-6, Scan 58-6 Wall,

Scan 58-7, Scan 58-7 High Top,

Scan 58-8, Scan 58-8 High Top,

Scan 58-9, Scan 58-9 High Top, and

Scan 58-10, Scan 58-10 High Top wood-burning stoves manufactured by Scan A/S. Glasvaenget 3-9, 5492 Vissenbjerg, Denmark

Scan 58 assembly and instruction manual dated 24th March 2011, reference: GB 90358500-5.

Scan 58 Series supplementary instructions for UK Smoke Control Areas dated 1st March 2013, reference: SCAN58SCA.

A mechanical stop to prevent closure of the secondary air control beyond the one-third open position must be implemented.

Scan 83-1 stove,

Scan 83-2 stove,

Scan 83-3 Maxi stove,

Scan 83-4 Maxi stove,

Scan 83-5 stove,

Scan 83-6 stove,

Scan 83-7 Maxi stove, and

Scan 83-8 Maxi stove manufactured by Scan A/S, Glasvaenget 3-9, 5492 Vissenbjerg, Denmark

Instruction manual entitled "Instructions for installation and use: SCAN DSA 6 & DSA 7-5", reference: Edition 17.09.2010.

Instruction manual entitled "DSA 7-5 – UK smoke control areas" dated 1st January 2012, reference: DSA 7-5 SMOKE.

Instruction manual entitled "Instructions for installation (including directions for use and stoking)", reference: Edition 05.10.2010 – GB.

The appliance must be fitted with a mechanical stop to prevent closure of the air wash control lever beyond the 50% open position.

ILD 6 Insert stove instruction manual dated 25th February 2013, reference: 12-1b GB.

The appliance must be fitted with a permanent stop preventing closure of the secondary air control beyond the 18% open position.

Instruction manual dated 1st July 2013, reference: Manual version. No. 13-1 GB 01.07.13.

The appliance must be fitted with a permanent stop to prevent secondary air control closure beyond the 7.5% open position.

Installation and operating instruction manual dated June 2013, reference: Scandian MF&WD Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

Installation and operating instruction manual dated June 2013, reference: Scandian MF&WD Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

Instruction manual dated 7th January 2013, reference: Instruction manual. Wood chip furnace with boiler type Schmid Pyrotroinc Modular issue 1.

Instruction manual dated 2010, reference: PersonalTouch Version 2010. EVO10V531\PT_2010_C3

Jade Instruction manual dated 1st January 2013, reference: WOOD STOVES MANUAL INSTALLATION – USE 1/1/2013 CHARACTERISTICS OF THE STOVE.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control beyond the 40% open position.

Saphir Instruction manual dated 1st January 2013, reference: WOOD STOVES MANUAL INSTALLATION – USE 1/1/2013 CHARACTERISTICS OF THE STOVE.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control beyond the 15 mm open position.

Instruction manual dated January 2013, reference: Pevex1014/AH/ver1.

The appliance must be fitted with permanent stops that ensure the secondary and tertiary air controls do not close beyond 1.1 cm open and 2 cm open positions respectively.

Instruction manual dated January 2013, reference: Pevex1014/AH/ver1.

The secondary air slider must have a built-in stop to prevent the slider from shutting off completely and must remain open by at least 40% of its full travel. The tertiary air control must be factory designed with a 2 cm open slot that remains 100% open.

Instruction manual dated January 2013, reference: Pevex1014/AH/ver1.

The secondary air slider must have a built-in stop to prevent the slider from shutting off completely and must remain open by at least 40% of its full travel. The tertiary air control must be factory designed with a 2 cm open slot that remains 100% open.

Instruction manual dated 21st December 2009, reference: TJ09C.

The appliance must be fitted with a system that prevents the closure of the secondary air flaps beyond the 8 mm open position.

Instruction manual dated 21st December 2009, reference: TJ09C.

The appliance must be fitted with a system that prevents the closure of the secondary air flaps beyond the 10 mm open position.

Installation and user instruction manual dated 4th June 2014, reference: NS-3A - NS-3B - NS-3C.

The appliance must be fitted with mechanical stops to prevent closure of the secondary air control beyond the 30% open position and the tertiary air control beyond the 50% open position.

Instruction manual dated 17th December 2013, reference: Penguin Manual Version 1 Issue 1.

The appliance must be modified to prevent closure of the secondary air control beyond the 1 cm open position.

Installation servicing instructions dated January 2014, reference: In1233 Edition 1a.

Operating instructions dated 28th January 2014, reference: Version M21/HB M27/GB.

Supplementary installation instructions dated January 2014, reference: IN1241 Edition 1a.

Installation servicing instructions dated January 2014, reference: In2015 Edition 1.

Operating instructions dated 28th January 2014, reference: Version M21/HB M27/GB.

Supplementary installation instructions dated January 2014, reference: IN1241 Edition 1a

Instruction manual dated February 2013, reference: GB12A Version 1.

The appliance must be fitted with a permanent stop preventing closure of the secondary air slide beyond the 23 mm open position.

Instruction manual dated February 2013, reference: GB12A Version 1.

The appliance must be fitted with a permanent stop preventing closure of the secondary air slide beyond the 50 mm open position.

Installation and Operating Instructions manual dated May 2013, reference: Sirius MF&WD Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

Installation and operating instructions manual dated May 2013, reference: Sirius MF&WD Version 1.

The appliance must be fitted with the manufacturer's smoke control kit.

SP Dual 15kW boiler,

SP Dual 22kW boiler,

SP Dual 28kW boiler,

SP Dual 34kW boiler and

SP Dual 40kW boiler manufactured by Fröhling Heizkessel und Behälterbau GmbH, Industriestraße 12, A–4710 Grieskirchen, Austria

Spartherm Arte U-50h – P3, Spartherm Arte U-90h – P3 and

Spartherm Arte U-70h – P3 insert stoves manufactured by Spartherm Feuerungstechnik GmbH, Maschweg 38, D-49324 Melle, Germany

Installation and Operating Instructions Linear Fireplace Cassettes dated January 2014, reference: Spartherm_AA_BA_Kaminkassette_Linear_GB_Stand 01-2014.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air controls beyond the 25% open position.

Instruction manual dated June 2014, reference: Instruction Manual Fireplace Inserts Version 06/2014.

A system to prevent closure of the air controls beyond the 3 mm open position must be implemented.

Installation and operating instructions dated July 2012, reference: Version 07/2013.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 13% open position.

Spartherm Varia ASh2L – P3, Spartherm Varia ASh2R – P3, Spartherm Varia ASh2L X – P3, and

Spartherm Varia ASh2R X – P3 wood-burning inset roomheaters manufactured by Spartherm Feuerungstechnik GmbH, Maschweg 38, D-49324 Melle, Germany

Instruction manual dated June 2014, reference: Instruction Manual Fireplace Inserts Version 06/2014.

A system to prevent closure of the air controls beyond the 7 mm open position must be implemented.

The manufacturer's instruction manual dated July 2008, reference: PM227 ENG Issue 2.

The manufacturer's instruction manual dated January 2009, reference: PM271 Issue 2.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50% open position.

The manufacturer's instruction manual reference: PM 176 – Issue 4.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50% open position.

Manufacturer's instruction manual dated May 2008, reference: PM230 Issue 1.

Instruction manual dated January 2009, reference: PM281 Issue 1

Instruction manual reference: PM416 Issue 1 (June 2010).

Smoke control kit instruction manual reference: PM501 Issue 1 (June 2010).

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Stoven Mayfair SE and Stoven Kensington SE 5kW Wood Burning Stoves manufactured by Newman Fireplaces, Ltd, Units 6 and 7 Rawreth Barns, Dollymans Farm, Doublegate Lane, Rawreth, Wickford, Essex, SS11 8UD

Strebel Taurus XL145,

Strebel Taurus XL190,

Strebel Taurus XL240 and Strebel Taurus XL290 boilers manufactured by KSM Stoker, Næssundvej 440 7960 Karby, Denmark

Instruction manual dated January 2013, reference: SN 131766.

Installation instruction manual dated January 2013, reference: SN 131766.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the positions between settings 3 and 4.

Instruction manual dated January 2013, reference: SN112787.

Installation instruction manual dated January 2013, reference: 112787.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the positions between settings 3 and 4.

Instruction manual dated January 2013, reference: SN 94770.

Installation instruction manual dated January 2013, reference: SN 94770.

The appliance must be fitted with a mechanical stop to prevent air control closure beyond the positions between settings 3 and 4.

The manufacturer's instructions dated 1st January 1983, reference: A10000.

The afterburn cycle shall last not less than 25 minutes and must come into operation each time the loading door is opened.

User and mounting manual dated July 2014, reference: 99-275 UK version.

The damper control unit referenced in the manufacturer's manual must be installed.

User and mounting manual for stove models TT22 and TT22S dated July 2014, reference: 99-234 UK version.

The appliance must be fitted with a smoke control kit to prevent closure of the primary and secondary air controls beyond the 25% open position.

Installation instructions dated July 2006, reference: Version 11/08/06.

Operating manual dated September 2009, reference: V8.051.

Maintenance instructions dated 2006, reference: Ver 1st September 2006

Installation instructions dated July 2006, reference: Version 11/08/06.

Operating manual dated September 2009, reference: V8.051.

Maintenance instructions dated 2006, reference: Ver 1st September 2006.

Installation instructions dated July 2006, reference: Version 11/08/06.

Operating manual dated September 2009, reference: V8.051.

Maintenance instructions dated 2006, reference: Ver 1st September 2006.

Installation instructions dated July 2006, reference: Version 11/08/06.

Operating manual dated September 2009, reference: V8.051.

Maintenance instructions dated 2006, reference: Ver 1st September 2006.

Instruction manual dated January 2011, reference: ED/11/05.

The appliance must be fitted with an air plate that prevents the teriary air controller from closing more than 17 mm and opening more than 45 mm.

Instruction manual dated 22nd January 2014, reference: Tiger solid fuel heating stoves inset multi-fuel models incorporating GH-T Firebox. Solid Fuel Stoves Manual v12.

Advice sheet dated 22nd January 2014, reference: Soliftec Smoke Advice Sheet no 1.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 5mm open position.

Installation and operating instruction manual dated 2nd May 2013, reference: TR5i,

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 3.5 mm open position.

Manual of assembly and use dated 20th September 2010, reference: RR 100920, and supplementary instruction manual of the same date, reference: UK 100920.

The appliance must be fitted with a system that prevents the full closure of the air control opening so that the air openings remain 3 mm (30%) open at the minimum setting.

Installation and user guide dated 26th July 2010, reference: FOR-177 GB 2 edition.

Additional Installation and user instructions for use in Smoke Control Areas dated July 2014, reference: Varde Aura 2. edition FOR-177 GB PM1053 Issue 2.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 50% open position.

Installation and user guide dated 15th May 2013, reference: Varde Fuego Revision 2.

Additional Installation and user Instructions for use in Smoke Control Areas dated July 2014, reference: Varde Fuego - Revision 02 Installation and User Guide PM1062 Issue 2.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 50% open position.

Installation and user guide dated 18th June 2009, reference: FOR-176 GB 1 edition.

Additional Installation and user Instructions for use in Smoke Control Areas dated July 2014, reference: Varde Shape 1. edition FOR-176 GB PM1054 Issue 2.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 37.5% open position.

Installation and user guide dated 3rd June 2014, reference: Revision 6.

Additional Installation and user Instructions for use in Smoke Control Areas dated July 2014, reference: Varde Uniq - Revision 4 Installation and User Guide PM1055 Issue 2.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air control beyond the 30% open position.

Installation instruction manual dated January 2010, reference: 092947/00.

Operating instruction manual dated January 2010, reference: 092945/00

Instruction manual dated January 2013, reference: Vega 100 Clean Burn II Installation and Operation Instructions REV: D.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 50% open position.

Instruction manual dated January 2013, reference: Vega 200 Clean Burn Installation and Operation Instructions REV: D.

The appliance must be fitted with a mechanical stop to prevent secondary air control closure beyond the 50% open position.

Homeowner's installation and operating manual dated July 2013, reference: 30005554 7/13 Rev. 10.

The appliance must be operated with the catalyst and fitted with a system that prevents closure of the air control lever beyond the 25 mm (5 o'clock) open position.

Homeowner's installation and operating manual dated July 2013, reference: 30005552 7/13 Rev. 9.

The appliance must be operated with the catalyst.

Instruction manual dated June 2010, reference: PM485 Issue 1.

Smoke control kit instruction manual dated June 2010, reference: PM490 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated June 2010, reference: PM485 Issue 1.

Smoke control kit instruction manual dated June 2010, reference: PM490 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position

Instruction manual dated June 2011, reference: PM552 - Issue 1.

Smoke control kit instruction manual dated July 2011, reference: PM490 Issue 2.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50% open position.

Vista Magnifico SE and Vista Perfetto SE 4.9 kW Wood Burning Stove manufactured by Newman Fireplaces, Ltd, Units 6 and 7 Rawreth Barns, Dollymans Farm, Doublegate Lane, Rawreth, Wickford, Essex, SS11 8UD

Installation and user instruction manual dated 3rd June 2014, reference: NS-1, NS-2 Edition: 2.

The appliance must be fitted with mechanical stops to prevent closure of the secondary air control beyond the 30% open position and the tertiary air beyond the 50% open position.

Instruction manual dated 26th July 2012, reference: VIT06C.

A permanent stop to prevent closure of the secondary air control beyond 20% open must be implemented

Instruction manual dated 26th July 2012, reference: VIT11C.

A permanent stop to prevent closure of the secondary air control beyond 20% open must be implemented.

Vitoligno 300-P operating instructions dated January 2014 reference: 5592 617 GB.

Vitoligno 300-P Technical guide dated January 2014, reference: 5414 644 GB

Westfire WF One and Two series installation manual and operating instructions and supplementary instruction manual dated 1st June 2011, reference: Westfire supplementary instructions June 2011/Version 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control less than 50% open.

Installation and operating instructions dated 2007, reference: WF15–WF16–WF20, together with supplementary instructions dated 2007, reference: 01wfuk.2007.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond 50 mm.

Westfire Uniq 18

Westfire Uniq 17

Westfire Uniq 19

Westfire Uniq 23

Westfire Uniq 23 side Glass Westfire Uniq 23 Inset stoves manufactured by Westfire APS Tømrervej 3 DK-6800 Varde Denmark

Instruction manual reference: WESTFIRE SUPPLEMENTARY INSTRUCTIONS JUNE 2010.

The appliance must be fitted with a mechanical stop to prevent closure of the secondary air slide beyond the 30 mm open position.

Westfire WF21 installation manual and operating instructions and supplementary instruction manual dated 1st June 2011, reference: Westfire supplementary instructions June 2011/Version 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control less than 60% open.

Westfire WF26, WF27, WF28 installation manual and operating instructions and supplementary instruction manual dated 1st June 2011, reference: Westfire supplementary instructions June 2011/Version 1.

The appliance must be fitted with a permanent stop to the secondary air slider control to prevent closure more than 20 mm from the fully closed position.

Westfire WF23/Uniq23, WF32/Uniq 32 inset stove installation manual and operating instructions and supplementary Instruction manual dated 1st June 2011, reference: Westfire supplementary instructions June 2011/Version 1.

The appliance must be fitted with a permanent stop to prevent closure of the secondary air control less than 50% open.

Westfire Uniq 33 SE, Westfire Uniq 33 side glass SE,

Westfire Uniq 34 SE, and

Westfire Uniq 34 side glass SE multi-fuel 6.1 kW stoves manufactured by Westfire ApS, Tømrervej 3, VARDE, DK-6800, Denmark

Westfire Uniq 35 SE Freestanding multi-fuel 4.3 kW stove,

Westfire Uniq 35 SE Pedestal multi-fuel 4.3kW stove,

Westfire Uniq 35 SE Inset with 3 sided frame multi-fuel 4.3kW stove, and

Westfire Uniq 35 SE Inset with 4 sided frame multi-fuel 4.3kW stove

manufactured by Westfire ApS, Tomrervej 3, VARDE, DK-6800, Denmark

Installation manual and operating instructions dated 2013, reference: WF35.

The appliance must be fitted with the manufacturer's smoke reduction kit to prevent closure of the secondary air control beyond the 25% open position.

The manufacturer's instruction manual dated May 2008, reference: 0916197/00

BioWIN operating manual dated July 2013, reference: 093209/02.

BioWIN installation instruction manual dated July 2013, reference: 093212/04.

The installation and operating instruction manual dated 1st June 2013, reference: Version INSSE.

The appliance must be modified to prevent closure of the existing secondary air slide plate, located beneath the appliance, beyond the 3 mm open position.

The installation and operating instruction manual dated 1st June 2013, reference: Version FSSE.

The appliance must be fitted with a system that prevents closure of the secondary air control beyond the 5 mm open position.

The installation and operating instructions manual dated 1st June 2013, reference: Version FFSE.

The appliance must be modified to prevent closure of the secondary air bleed hole beyond the 75% open position.

Instruction manual dated June 2011, reference: PM553 - Issue 1.

Smoke control kit instruction manual dated June 2011, reference: PM491 Issue 2.

A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50% open position.

Instruction manual dated June 2011, reference: PM559 - Issue 1.

Smoke control kit instruction manual dated June 2011, reference: PM491 Issue 2.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated June 2010, reference: PM489 Issue 1.

Smoke control kit instruction manual dated 5th April 2010, reference: PM491 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated June 2010, reference: PM489 Issue 1.

Smoke control kit instruction manual dated 5th April 2010, reference: PM491 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position.

Instruction manual dated February 2008, reference: PM184 Issue 3.

Smoke control kit instruction manual dated January 2010, reference: PM403 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 50% open position and a system that ensures a gap of 1 mm for bleed of primary air when the spin wheels are rotated to their fully closed positions.

Instruction manual dated February 2008, reference: PM184 Issue 3.

Smoke control kit instruction manual dated January 2010, reference: PM403 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 60% open position and a system that prevents full closure of the primary air controls

Instruction manual dated February 2008, reference: PM184 Issue 3.

Smoke control kit instruction manual dated January 2010, reference: PM403 Issue 1.

A permanent stop must be positioned to prevent closure of the secondary air control below the 60% open position and a system that prevents full closure of the primary air controls

Instruction manual dated February 2013, reference: GB12A Version 1.

The appliance must be fitted with a system that prevents the closure of the secondary air slider beyond the 10 mm open position.

Instruction manual dated February 2013, reference: GB12A Version 1.

The appliance must be fitted a system that prevents the closure of the secondary air slider beyond the 8 mm open position.